Hampton Bay GVQ9713A-2 Guide d'installation télécharger pdf (Page 4)

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea Canopy (#1) 1ea Screw Collar Loop (#2) 5feet Chain (#3) 1ea Ring (#4) 1ea Loop (#5)

12ea Side Screw (#7) 3ea Socket Sleeves (#11) 2ea Fixture Bracket (#13) 1ea Quick Link (#21)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface. Evenly spread the

fixture arms to open the pendant. (See Fixture Distribution on Page 5).

Screw the Loop (#5) onto the Nipple (#6).

Use the Quick Link (#21) to attach the Chain (#3)

to the Loop (#5).

Weave the fixture wires up through the Loop (#5), through the Chain (#3), through the Ring

(#4), through the Screw Collar Loop (#2), through the Canopy (#1), and through the Nipple

(#19 on Page 7) on the Mounting Strap (#18 on Page 7). Screw the Nipple (#19) into the

Screw Collar Loop (#2).

4. Screw the Column (#8) onto Nipple A (#9). Place one of the Fixture Brackets (#13)

around the fixture body and secure it to the top of the fixture body with six Side Screws

(#7). Place the remaining Fixture Bracket (#13) around the bottom of the fixture body

and secure it into place using the remaining six Side Screws (#7).

5. Place the three Socket Sleeves (#11) over the three Sockets (#10).

6. Install three 60 watt candelabra

incandescent light Bulbs (#12) (not included) or three

equivalent candelabra

compact fluorescent light bulbs (not included) in the three Sockets

(#10) in the fixture.

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

Hampton Bay GVQ9713A-2 Guide d'installation Page 4