Hampton Bay ES0746BN Manuel d'utilisation et d'entretien télécharger pdf (Page 2)

3. Wrap the ground wire (3) under and around the ground screw (5) which marked “GND”, and

fasten the ground screw (5) to make sure the ground wire (3) is securely connected. Connect

black/smooth fixture wire to black supply wire and white/ribbed fixture wire to the white supply

wire using wire connectors (2) provided.

4. Place the canopy (9) to cover into the 2 mounting screws (7) and attach to ceiling by tightening

the Finial (11).

5. Place the shade (19) onto the lamp holder (18) and secure by tightening the socket ring (20).

6. Install bulb(21) onto the lamp holder (18).

ELECTRICAL CONNECTIONS

Required Supply Circuit: 120V, 60Hz

Connect the white wire(s) from the fixture to the white wire of the supply circuit. Connect the black wire(s) from the fixture

to the black wire of the supply circuit. Connect the green or bare copper wire to the ground wire of the supply circuit. Use

UL/CSA listed wire connectors suitable for the size type, and number of conductors. No loose strands or loose wires

should be present. Secure wire connectors with UL/CSA listed electrical tape.

1. Junction box

2. Wire connector

3. Ground wire

4. Mounting Plate

5. Ground screw

6. Fixture Wire

7. Mounting Screw

8. Machine Screw

9. Hexagonal Screw

10. Canopy

11. Finial

12. Tube A

13. Tube B

14. Tube C

15. Tube D

16. Tube E

17. Threaded tube

18. Lamp holder

19. Shade

20. Socket Ring

21. Bulb

1 2 3 4

Pas de commentaire

Hampton Bay ES0746BN Manuel d'utilisation et d'entretien Page 2