Hampton Bay EC9580BA Guide d'installation télécharger pdf (Page 2)

Thank you for purchasing this Hampton Bay interior flexible track kit. This product has been manufactured

with the highest standards of safety and quality.

FEATURES:

1. Track can be shaped into various designs.

2. Track heads are multi-directional.

3. Can be used with a standard 120 Volt Incandescent style dimmer switch.

4. Link Up to 4 Kits together using 1 power supply.

5. Power rating of up to 2400 watts.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www. homedepot.

com. Please reference SKU 452-177, UPC 008938595896 or SKU 762-203, UPC 008938295826 or SKU 338-910, UPC

008938295802.

GENERAL

1. Be sure to read these installation instructions and review the diagrams thoroughly before installing the track system.

2. All electrical connections must be in accordance with local codes and the National Electrical Code. If you are unfamiliar

with methods of installing electrical wiring, secure the services of a qualified licensed electrician.

3. These fixtures are intended to be mounted to a 4″ square x 2-1/8″deep metal octagon outlet box. The box must be

directly supported by the building structure.

4. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate

fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock.

Note: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and

situations that may occur. It must be understood that common sense, caution and care are factors that cannot be built into any

product. These factors must be supplied by the person(s) caring for, installing and operating the fixture. If at any time you are

uncomfortable or are unsure of what to do, please contact a qualified licensed electrician for further assistance.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before beginning the assembly or installation process. Save these instructions and refer to them when

additions to or changes in the track configuration are made.

1. For use with Hampton Bay EC series line voltage flexible track systems only.

2. This track system is designed for use with 120 volt circuits only.

3. The track system is not intended for use with a power supply cord, extension cords, etc. It is intended for direct wire to a

junction box only.

4. Do not install this lighting system in damp or wet locations.

5. CAUTION: LIGHTED LAMP IS HOT! Keep away from curtains and other combustible materials. Do not install any

lamps closer than 6 inches (15cm) from any curtain or similar combustible material.

6. Do not touch lamp at any time. Turn off power and allow bulbs to cool down before replacing. Use a soft cloth, gloves,

or re-lamping tool (see diagram) to change bulbs. Oil from skin may damage the bulb.

7. CAUTION: To reduce the risk of a burn during re-lamping, remove the track head from the track before re-lamping. Do

not touch hot lens, guard or enclosure.

8. CAUTION: To prevent the risk of fire, do not conceal or extend the track through a wall or ceiling.

9. CAUTION: To prevent the risk of fire and electrical shorting, do not install in locations where it is possible for the

electrical connections in the track to make contact with any conductive metals.

10. CAUTION: To prevent the risk of fire and overheating, before turning the power on, make sure all connections are

properly connected and secure.

11. CAUTION: To prevent the risk of fire and electric shock, do not attempt to connect power tools, extension cords,

appliances, etc to the track system.

12. Do not install any part of this system (TRACK) less than 7 feet (2.2m) above floor.

13. Turn the power off (breaker or fuse) before adding to, changing the configuration of the track, or modifying the light

system in anyway.

14. Use a minimum of 20” of space between stanchions when using 7 stanchions.

15. This flexible track kit is intended to be installed by support stanchions only.

16. Before energizing the fixture, make sure that the lighting system is clear of all material which could cause a direct short.

Note: If at any time you are uncomfortable or are unsure of what to do, please contact a qualified licensed electrician for

further assistance.

SAVE THESE INSTRUCTIONS

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):

Ladder Safety goggles Wire stripper Gloves Flathead screwdriver Phillips screwdriver

Electrical tape Drill 1/4 In. (method 1) or

5/8 In. (method 2) Drill bits

1 2 3 4 5 6 7 ... 11 12

Commentaires sur ces manuels

Pas de commentaire

Hampton Bay EC9580BA Guide d'installation Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hampton Bay EC9580BA