Hampton Bay BSG8212-2 Guide d'installation télécharger pdf

○

ASSEMBLY INSTRUCTION

SKU#416-093

Note: Please consult a qualified electrician if you are not certain of the installation.

CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

1. Fasten the provided 2 mounting screws to the mounting strap. Make sure the thread of the screw is facing

downward when the mounting strap is attached to the outlet box. Fasten mounting strap using 2 outlet box

screws provided.

2. Place the ceiling pan onto the fixture. Place the tube over the top nipple and screw the upper section all the

way to the bushing located at the fixture.

3. Connect the wire white to white and black to black, cover the connections using the wire connectors

provided. Tie the ground wires from outlet box and fixture to the ground screw on the mounting strap.

4. Carefully tuck all wiring back into outlet box. Locate the canopy over the outlet box, positioning the

mounting screw heads through the holes of canopy. Secure the canopy by using 2 lock nuts provided.

5. Secure the bottom nipple by screwing the hex nut against the bushing.

6. Install the bulbs. (bulbs included)

7. Place glass shade and bottom cap over the bottom nipple & secure them using the finial until the glass hole

firmly to the fixture.

○A ASSEMBLY INSTRUCTION SKU#416-093 Note: Please consult a qualified electrician if you are not certain of the installation. CAUTION: Before starting

Pas de commentaire

Hampton Bay BSG8212-2 Guide d'installation